Namespace List

Here is a list of all documented namespaces with brief descriptions:

[detail level 1234567]

►NAdventureCore
►NAssets
►NSoftLeitner
►NAdventureCore
►NCharacter
►NInstructions
CConsolidatedMessagesInstruction	Sends start and end messages to the character when it is added and removed multiple instructions of this type are consolidated using the key so if 2 instructions are added and removed the messages are only sent once
CModifyDamageReceivedInstruction	Modifies received damage on the character, for example a defense buff that halves damage
CModifyDamageSent	Modifies sent damage on the character, for example an attack power buff that doubles damage
►NItem
►NSlots
CActionItemSlot	Special InstantiatingItemSlot for PrefabItems that contain an action at their root the owner of the action is set on equip and input is forwarded from the slot to the action
CUsableItemSlot	Special item slot that instantiates item prefabs and starts actions on them if they have one the items actual effect(for example healing) is triggered when the action sends an ACT message
►NEditor
►NPersistence
CPersistenceContainerEditor
CPlayerPrefDataEditor
►NVisualScripting
CActionAreaChangedDescriptor
CActionAreaDescriptor
CActionChangedDescriptor
CActionEndableChangedDescriptor
CActionEndedDescriptor
CActionEndingDescriptor
CActionInfoDescriptor
CActionMessageReceivedDescriptor
CActionStartableChangedDescriptor
CActionStartedDescriptor
CActionStartingDescriptor
CActivateDamageDescriptor
CActorInfoDescriptor
CActorTargetDescriptor
CAddAttributeDescriptor
CAddEffectDescriptor
CAddInstructionDescriptor
CAddItemsDescriptor
CAddResourceDescriptor
CAdventureDescriptorBase
CAlignToPositionDescriptor
CAlignToTargetDescriptor
CAnimatorBoolInstructionDescriptor
CAnimatorFloatInstructionDescriptor
CAnimatorIntInstructionDescriptor
CAreaCharactersDescriptor
CAreaEnterDescriptor
CAreaExitDescriptor
CAreaItemsDescriptor
CAssociatedCharacterDescriptor
CAttributeMultiplierInstructionDescriptor
CAttributePoolChangedDescriptor
CAttributeValueDescriptor
CAttributeValuesDescriptor
CBoolInputReceivedDescriptor
CCanAddItemsDescriptor
CCancelCharacterDescriptor
CCancelPlayableAnimationDescriptor
CCharacterEnterDescriptor
CCharacterEnterItemDescriptor
CCharacterExitDescriptor
CCharacterExitItemDescriptor
CCharacterMessageReceivedDescriptor
CCheckActionDescriptor
CCheckActionEndableDescriptor
CCheckActionNameDescriptor
CCheckActionStartableDescriptor
CCheckAttributeValueDescriptor
CCheckEffectDescriptor
CCheckEquipmentDescriptor
CCheckItemCategoryQuantityDescriptor
CCheckItemQuantityDescriptor
CCheckMovementTargetDistanceDescriptor
CCheckPersistenceDescriptor
CCheckPersisterDescriptor
CCheckResourceValueDescriptor
CConfirmCharacterDescriptor
CCreatePlayableAnimationClipDescriptor
CCreatePlayableAnimationControllerDescriptor
CDamagedCharacterDescriptor
CDamagedCharacterTotalDescriptor
CDamagedTriggerDescriptor
CDamagedTriggerTotalDescriptor
CDamageSenderDescriptor
CDamagingCharacterDescriptor
CDamagingTriggerDescriptor
CDeactivateDamageDescriptor
CDeleteAreaDescriptor
CDeleteDescriptor
CDestroyPlayableAnimationDescriptor
CDialogClosingDescriptor
CDialogClosingRefDescriptor
CDialogContinuingDescriptor
CDialogContinuingRefDescriptor
CDialogOpeningDescriptor
CDialogOpeningRefDescriptor
CDialogsInfoDescriptor
CDialogWaitingDescriptor
CDialogWaitingRefDescriptor
CEffectAddedDescriptor
CEffectPoolChangedDescriptor
CEffectRemovedDescriptor
CEffectsDescriptor
CEquipItemCategoryDescriptor
CEquipItemDescriptor
CFocusDialogDescriptor
CFocusDialogRefDescriptor
CGetActionDescriptor
CGetCharacterBoolDescriptor
CGetCharacterDescriptor
CGetCharacterFloatDescriptor
CGetCharacterIntDescriptor
CGetOffsetRotationDescriptor
CGetPersistenceBoolDescriptor
CGetPersistenceDescriptorBase
CGetPersistenceFloatDescriptor
CGetPersistenceIntDescriptor
CGetPersistenceStringDescriptor
CGetPersisterBoolDescriptor
CGetPersisterDescriptorBase
CGetPersisterFloatDescriptor
CGetPersisterIntDescriptor
CGetPersisterStringDescriptor
CGetPlayableAnimationDescriptor
CGetSaveIndexDescriptor
CHasEffectDescriptor
CHasItemDescriptor
CHeroInfoDescriptor
CHeroSheathingDescriptor
CHideSlotInstructionDescriptor
CInstructionDescriptorBase
CIntegerInputReceivedDescriptor
CInventoryChangedDescriptor
CInventoryItemsDescriptor
CItemAreasDescriptor
CItemCategoryQuantityDescriptor
CItemCharactersDescriptor
CItemEnterDescriptor
CItemExitDescriptor
CItemQuantityDescriptor
CKeepMovementTargetAlignedDescriptor
CLoadAreaDescriptor
CLoadDescriptor
CLockedActionDescriptor
CLockedCharacterDescriptor
CLockOnCandidateChangedDescriptor
CLockOnManagerDescriptor
CLockOnTargetChangedDescriptor
CLockOnTargetChangedWithoutHoldingDescriptor
CLogDescriptor
CManagerStateChangedDescriptor
CManagerStateEnteredDescriptor
CManagerStateExitedDescriptor
CManagerStateInfoDescriptor
CMoveCharacterDescriptor
CMovementInfoDescriptor
CMovementSpeedMultiplierInstructionDescriptor
CMovementTargetDescriptor
CMovementVectorsDescriptor
CPerformActionDescriptor
CPerformActionNameDescriptor
CPlayableAnimationClipDescriptor
CPlayableAnimationClipSettingsDescriptor
CPlayableAnimationControllerDescriptor
CPlayableAnimationControllerSettingsDescriptor
CPlayableAnimationInfoDescriptor
CPlayAnimationDescriptor
CPlayAudioDescriptor
CPlayManagerAudioDescriptor
CPlayManagerMusicDescriptor
CPlayMusicDescriptor
CPlayPlayableAnimationDescriptor
CRagdollDescriptor
CRandomChanceDescriptor
CRemoveAttributeDescriptor
CRemoveEffectDescriptor
CRemoveInstructionDescriptor
CRemoveItemsDescriptor
CRemoveResourceDescriptor
CReplaceDescriptor
CResetInputDescriptor
CResetManagerStateOverrideDescriptor
CResetMomentumDescriptor
CResetResourcesDescriptor
CResetStateOverrideDescriptor
CResourcePoolChangedDescriptor
CResourceValueChangedDescriptor
CResourceValueDescriptor
CResourceValuesDescriptor
CRunActionDescriptor
CRunActionNameDescriptor
CSaveAreaDescriptor
CSaveDescriptor
CSendCharacterMessagesDescriptor
CSendDamageDescriptor
CSetActionEndableDescriptor
CSetActionNameDescriptor
CSetActionNameVariableDescriptor
CSetActionNameVariableUnitWidget
CSetActionStartableDescriptor
CSetActionVariableUnitWidget
CSetBoolVariableUnitWidget
CSetCharacterBoolDescriptor
CSetCharacterFloatDescriptor
CSetCharacterIntDescriptor
CSetCharacterStateDescriptor
CSetCharacterTriggerDescriptor
CSetDialogResultDescriptor
CSetDialogResultRefDescriptor
CSetFloatVariableUnitWidget
CSetIntVariableUnitWidget
CSetManagerStateDescriptor
CSetManagerStateOverrideDescriptor
CSetMovementTargetDescriptor
CSetPersistenceBoolDescriptor
CSetPersistenceDescriptorBase
CSetPersistenceFloatDescriptor
CSetPersistenceIntDescriptor
CSetPersistenceStringDescriptor
CSetPersisterBoolDescriptor
CSetPersisterDescriptorBase
CSetPersisterFloatDescriptor
CSetPersisterIntDescriptor
CSetPersisterStringDescriptor
CSetPlayableControllerBoolDescriptor
CSetPlayableControllerFloatDescriptor
CSetPlayableControllerIntDescriptor
CSetPlayableControllerStateDescriptor
CSetPlayableControllerTriggerDescriptor
CSetSaveIndexDescriptor
CSetStateDescriptor
CSetStateOverrideDescriptor
CSetStringVariableUnitWidget
CSetVariableUnitWidgetBase
CShowDialogDescriptor
CShowDialogOptionsDescriptor
CShowDialogOptionsRefDescriptor
CShowDialogRefDescriptor
CShowDialogTextDescriptor
CShowDialogTextRefDescriptor
CSoulsNPCActionsDescriptor
CSoulsNPCStateDescriptor
CSoulsPerformNPCActionDescriptor
CSoulsWeaponActionsDescriptor
CStartActionDescriptor
CStartActionNameDescriptor
CStateChangedDescriptor
CStateEnteredDescriptor
CStateExitedDescriptor
CStateInfoDescriptor
CStatMultiplierInstructionDescriptor
CSuspendControlInstructionDescriptor
CSuspendMovementCollisionInstructionDescriptor
CSuspendMovementControlInstructionDescriptor
CSuspendMovementInstructionDescriptor
CSuspendMovementPartsInstructionDescriptor
CSuspendMovementPersistenceInstructionDescriptor
CSuspendReceiveDamageInstructionDescriptor
CSuspendSendDamageInstructionDescriptor
CTeleportCharacterDescriptor
CVector2DirectionDescriptor
CVectorInputReceivedDescriptor
CVisualScriptingActionInfoDescriptor
►NTests
CLockOnTest
►CTestInput
CITestActions
CIUIActions
CTestActions
CUIActions
►NTimeline
CDialogBehaviour
CDialogClip	Timeline track that shows text in a dialog, can be configured to require confirmation
CDialogHideBehaviour
CDialogHideClip	Timeline clip that fades out a dialog
CDialogShowBehaviour
CDialogShowClip	Timeline clip that fades in a dialog
CDialogTrack	Timeline track for displaying a dialog in the ui using s DialogBase
CInstructionBehaviour
CInstructionClip	Timeline clip that adds instructions to a character(suspending movement or example)
CInstructionTrack	Timeline track that adds instructions to a character(suspending movement or example)
CMarchClip	Timeline clip for marching characters(making them walk somewhere using their movement and animations)
CMarchTrack	Timeline track for marching characters(making them walk somewhere using their movement and animations)
CStateBehaviour
CStateClip	Timeline clip that sets a state on a StateManager
CStateOverrideBehaviour
CStateOverrideClip	Timeline clip that sets an override state on a StateManager
CStateTrack	Track timeline component for clips that change StateManagers
CTweenBehaviour
CTweenClip
CTweenMixerBehaviour
CTweenTrack
CWalkBehaviour
►NVisualScripting
CActionAreaChangedUnit
CActionAreaUnit
CActionChangedUnit
CActionEndableChangedUnit
CActionEndedUnit
CActionEndingUnit
CActionInfoUnit
CActionMessageReceivedUnit
CActionStartableChangedUnit
CActionStartedUnit
CActionStartingUnit
CActiorIdlingUnit
CActivateDamageUnit
CActorInfoUnit
CActorTargetUnit
CAddAttributeUnit
CAddEffectUnit
CAddInstructionUnit
CAddItemsUnit
CAddResourceUnit
CAlignToPositionUnit
CAlignToTargetUnit
CAnimatorBoolInstructionUnit
CAnimatorFloatInstructionUnit
CAnimatorIntInstructionUnit
CAreaCharactersUnit
CAreaEnterUnit
CAreaExitUnit
CAreaItemsUnit
CAssociatedCharacterUnit
CAttributeMultiplierInstructionUnit
CAttributePoolChangedUnit
CAttributeValuesUnit
CAttributeValueUnit
CBoolInputReceivedUnit
CCanAddItemsUnit
CCancelCharacterUnit
CCancelPlayableAnimationUnit
CCharacterEnterItemUnit
CCharacterEnterUnit
CCharacterExitItemUnit
CCharacterExitUnit
CCharacterMessageReceivedUnit
CCheckActionEndableUnit
CCheckActionNameUnit
CCheckActionStartableUnit
CCheckActionUnit
CCheckAttributeValueUnit
CCheckEffectUnit
CCheckEquipmentUnit
CCheckItemCategoryQuantityUnit
CCheckItemQuantityUnit
CCheckMovementTargetDistanceUnit
CCheckPersistenceUnit
CCheckPersisterUnit
CCheckResourceValueUnit
CConfirmCharacterUnit
CCreatePlayableAnimationClipUnit
CCreatePlayableAnimationControllerUnit
CDamagedCharacterTotalUnit
CDamagedCharacterUnit
CDamagedTriggerTotalUnit
CDamagedTriggerUnit
►CDamageSenderUnit
CUnitDamageSender
CDamagingCharacterUnit
CDamagingTriggerUnit
CDeactivateDamageUnit
CDeleteAreaUnit
CDeleteUnit
CDestroyPlayableAnimationUnit
CDialogClosingRefUnit
CDialogClosingUnit
CDialogContinuingRefUnit
CDialogContinuingUnit
CDialogOpeningRefUnit
CDialogOpeningUnit
CDialogsInfoUnit
CDialogWaitingRefUnit
CDialogWaitingUnit
CEffectAddedUnit
CEffectPoolChangedUnit
CEffectRemovedUnit
CEffectsUnit
CEquipItemCategoryUnit
CEquipItemUnit
CFindRecursiveUnit
CFocusDialogRefUnit
CFocusDialogUnit
CGetActionUnit
CGetCharacterBoolUnit
CGetCharacterFloatUnit
CGetCharacterIntUnit
CGetCharacterUnit
CGetOffsetRotationUnit
CGetPersistenceBoolUnit
CGetPersistenceFloatUnit
CGetPersistenceIndexUnit
CGetPersistenceIntUnit
CGetPersistenceStringUnit
CGetPersistenceValueUnit
CGetPersisterBoolUnit
CGetPersisterFloatUnit
CGetPersisterIntUnit
CGetPersisterStringUnit
CGetPersisterValueUnit
CGetPlayableAnimationUnit
CHasEffectUnit
CHasItemUnit
CHideSlotInstructionUnit
CInOutUnit
CInstructionUnitBase
CIntegerInputReceivedUnit
CInventoryChangedUnit
CInventoryItemsUnit
CItemAreasUnit
CItemCategoryQuantityUnit
CItemCharactersUnit
CItemEnterUnit
CItemExitUnit
CItemQuantityUnit
CKeepMovementTargetAlignedUnit
CLazyInOutUnit
CLazyUnit
CLoadAreaUnit
CLoadUnit
CLockedActionUnit
CLockedCharacterUnit
CLockOnManagerUnit
CLogUnit
CManagerStateChangedUnit
CManagerStateEnteredUnit
CManagerStateExitedUnit
CManagerStateInfoUnit
CManagerStateStartedUnit
CManagerStateTransitionedUnit
CMoveCharacterUnit
CMovementInfoUnit
CMovementSpeedMultiplierInstructionUnit
CMovementTargetUnit
CMovementVectorsUnit
CPerformActionBaseUnit
CPerformActionNameUnit
CPerformActionUnit
CPlayableAnimationClipSettingsUnit
CPlayableAnimationClipUnit
CPlayableAnimationControllerSettingsUnit
CPlayableAnimationControllerUnit
CPlayableAnimationInfoUnit
CPlayAnimationUnit
CPlayAudioUnit
CPlayManagerAudioUnit
CPlayManagerMusicUnit
CPlayMusicUnit
CPlayPlayableAnimationUnit
CRagdollUnit
CRandomChanceUnit
CRemoveAttributeUnit
CRemoveEffectUnit
CRemoveInstructionUnit
CRemoveItemsUnit
CRemoveResourceUnit
CReplaceUnit
CResetInputUnit
CResetManagerStateOverrideUnit
CResetMomentumUnit
CResetResourcesUnit
CResetStateOverrideUnit
CResourcePoolChangedUnit
CResourceValueChangedUnit
CResourceValuesUnit
CResourceValueUnit
CRunActionNameUnit
CRunActionUnit
CSaveAreaUnit
CSaveUnit
CSendCharacterMessagesUnit
CSendDamageUnit
CSetActionEndableUnit
CSetActionNameUnit
CSetActionNameVariableUnit
CSetActionStartableUnit
CSetActionVariableUnit
CSetBoolVariableUnit
CSetCharacterBoolUnit
CSetCharacterFloatUnit
CSetCharacterIntUnit
CSetCharacterStateUnit
CSetCharacterTriggerUnit
CSetDialogResultRefUnit
CSetDialogResultUnit
CSetFloatVariableUnit
CSetIntVariableUnit
CSetManagerStateOverrideUnit
CSetManagerStateUnit
CSetMovementTargetUnit
CSetPersistenceBoolUnit
CSetPersistenceFloatUnit
CSetPersistenceIndexUnit
CSetPersistenceIntUnit
CSetPersistenceStringUnit
CSetPersistenceValueUnit
CSetPersisterBoolUnit
CSetPersisterFloatUnit
CSetPersisterIntUnit
CSetPersisterStringUnit
CSetPersisterValueUnit
CSetPlayableControllerBoolUnit
CSetPlayableControllerFloatUnit
CSetPlayableControllerIntUnit
CSetPlayableControllerStateUnit
CSetPlayableControllerTriggerUnit
CSetStateOverrideUnit
CSetStateUnit
CSetStringVariableUnit
CSetVariableUnitBase
CShowDialogOptionsRefUnit
CShowDialogOptionsUnit
CShowDialogRefUnit
CShowDialogTextRefUnit
CShowDialogTextUnit
CShowDialogUnit
CStartActionNameUnit
CStartActionUnit
CStateChangedUnit
CStateEnteredUnit
CStateExitedUnit
CStateInfoUnit
CStateStartedUnit
CStateTransitionedUnit
CStatMultiplierInstructionUnit
CSuspendControlInstructionUnit
CSuspendMovementCollisionInstructionUnit
CSuspendMovementControlInstructionUnit
CSuspendMovementInstructionUnit
CSuspendMovementPartsInstructionUnit
CSuspendMovementPersistenceInstructionUnit
CSuspendReceiveDamageInstructionUnit
CSuspendSendDamageInstructionUnit
CSystemEventUnit
CTeleportCharacterUnit
CUnityEventUnit
CUnityEventUnitCustomArgs
CUnityEventUnitCustomOutput
CUnityEventUnitOtherArgs
CVector2DirectionUnit
CVectorInputReceivedUnit
CVisualScriptingActionInfoUnit
CAnimatedCharacterBase
CAnimationEventFuncs	Exposes a couple basic gameobject methods so they can be used in animation events
CAnimationToggler	Behaviour that moves an animator between two states GoA,GoB or Toggle has to be called by somthing else like a TriggerArea<TArea, TItem> or a ButtonAction useful for things like moving platforms and elevator(in combination with a CharacterCarrierArea)
CAnimatorBoolInstruction	Sets a bool parameter in an animator and resets it to the opposite value
CAnimatorFloatInstruction	Sets a float parameter in an animator
CAnimatorIntInstruction	Sets a int parameter in an animator
CAnimatorMovementSetter	Simple utility behaviour that can be used to transfer movement parameters to an animator
CAnimatorParameterSetter	Helper that enables setting bool, int and float parameters on an animator from a UnityEngine.Events.UnityEvent in the inspector
CAnimatorProxy	Forwards animator events and root motion to a character needed when a character needs them but can't sit on the same gameobject as the animator
CAnimatorSpeedMultiplierInstruction	Multiplies animator speed with a value, resets speed to 1
CAttributeEffect	Effect that modifies an attribute while it is active by adding to it
CAttributeMultiplierInstruction	Multiplies the attributes of its character while it is active for examplem a buff that increases strength by 10%
►CAttributePool	Manages the modification and observation of a defined set of attributes and stats has built in support for stats that define a resources maximum(max health, max stamine, ...)
CAttributeData
CResourceMaximum
CValueData
CAttributePoolText	Shows all attribute values of a pool in a text component, useful for debugging
CAttributeStat	Base class for stats, stats are metrics that do not have a value themselfes instead they are calculated using a base value and then incorporating attributes and modifiers for example a defense stat that has a base value and increases with the characters strength attribute and armor equipment how the final value is calculated is defined in the concrete implementations, modifiers are applied afterwards
CAttributeStatPanel	Visualizes an AttributeStat and its current value in an AttributePool
CAttributeStatValue	Serializable utility class that combines a stat with a value useful for configuring stat values in the inspector for example the base stats of an AttributePool or the required stats for equipment
CAttributeType	Attributes are whole number metrics that may change during the course of the game they start with a value defined in their AttributePool modifiers on top of them may change the value that is returned to the outside word but do not in fact change the attribut value itself
CAttributeValue	Serializable utility class that combines an attribute with a value useful for configuring attribute values in the inspector for example the starting attributes of an AttributePool or the required attributes for equipment
CAttributeValuePanel	Visualizes an AttributeType and its current value in an AttributePool
►CAudioManager	Simple manager that allows playing audio clips by using a key hooking a characters CharacterBase.MessageReceived up to Play(string) enables playing sounds from anything else hooked up to the messageing, usually animators or timelines
CMusicTrack
CSoundEvent
CAudioSlider	Ui behaviour that lets players change the volume of an audio mixer
CBehaviourEventTrigger	Unity events invoked by the most common unity messages like Start or OnEnable also contains a couple helper functions that may be useful to be called from the events
CBoolPersistenceTrigger	Unity events that are fired in relation to a persisted bool for example to disable or enable a barrier when the value is set
CBufferedCharacterActor	Actor that buffers a requested action for a defined time and starts it if the current action can end in that timeframe
CButtonAction	Action that repeatedly lets a character interact with some object that is also animated plays an animation on the character and another one on an object when the character reaches a certain point the animation needs to send a START and END message and an ACT message to start the object animation useful for buttons or levers that reset themselfes
CButtonInputAdapter	Behaviour that allows hooking up an input event from the new input system to a button the button is pressed and released according to the input action phase
CButtonOnPlatformModifier	Modifier for the new input system that only acts on the selected platform this is used to disable the esc button in the editor so the game view can be exited without opening the menu
CButtonWithoutOneModifier	Modifier for the new input system that only acts when a modifier is NOT active when an action is bound to s and another to ctrl+s the new input system would still perform the first one when ctrl was pressed put this modifier with ctrl on the first action to solve that
CCameraController	Simple camera controller without lock-on or cinemachine
CCapacityRaisingItem	Item that raises the ListedInventory.Capacities for another item for example a bigger coin pouch or arrow quiver
CChangingResourceValue	Resource value that changes its value over time
CCharacterActionArea	Helper behaviour that gives easy access to any actions that OnTriggerEnter(Collider) if your OnTriggerEnter does not fire check the layer matrix in your physics settings and the collision action matrix at https://docs.unity3d.com/Manual/CollidersOverview.html
CCharacterActionAreaText	Shows an action areas current action in a ui text, useful for debugging
CCharacterActionBase	Character actions are, very loosely, defined as anything a character does in the game they typicall have a start and end and may only be started in the right circumstances they are used to encapsulate some behaviour for a character which can then be put on the character itself or some other object it may interact with for example a jump would be an action directly on a character, climbing a ladder or swinging a weapon are actions that are added to the pertaining object
CCharacterActionBindings	Handles event plumbing between InputAction and CharacterActionBase, simplifies switching out actions behind an input
CCharacterActorBase	Base class for character actors these actors manage how and when exactly actions can start, are started and ended
CCharacterAssociation	Can be used to provide a ICharacterAssociator on a specific object to a character somewhere else in the scene
CCharacterBase	Base class for characters which are, in a way, the brain of the operation characters are the central component that provide access to and coordinate all the other systems(attributes, resources, inventory, movement, actions) they typically handle and redirect input or ai and posess a simple messaging system which is usually forwarded to actors and actions
CCharacterBaseTyped	Generic base for characters, allows the character implementation to define the type of actor, movement and inventory it needs in its signature
CCharacterCarrierArea	Area that parents any character that enters it and suspends its movement
CCharacterControllerMovement	Movement implementation that is built on top of the unity CharacterController meant for player movement it accepts input in OnMove(Vector2) and OnSprint(bool)
CCharacterDummy	Not actually a character, just implements the OnAnimation method targeted by animationEvents can be put on the gameobject of an animator to suppress errors because the events have no target
CCharacterInstructionBase	Character instruction can be any kind of change applied to a character all these changes(movement speed, collision suspension, ...) could be just directly applied without creating an instruction bundling them in this form averts the problem of different components fighting for control(eg. both an animation and an item reduce movement speed at the same time) another advantage of instructions is that they can be added directly in the inspector which can add lots of flexibility to actions IF UNITY RANDOMLY DECIDES THAT AN INSTRUCTION IS SUDDENLY NULL TRY REIMPORTING ALL ASSETS TO CLEAR CACHE
CCharacterInstructionObject	Used on the character editor to display an instruction that can be added to the character from the inspector for debugging
CCharacterMessenger	Receives and sends messages to a character, effectively acting as a proxy looks for the character in its parents unless specified useful for catching messages on objects that are instantiated on characters for example to play equipment specific sounds when some animation is performed (different sword slash sounds on a wooden vs metal sword or footsteps with heavy armor)
CCollisionDebugger	Logs any kind of collision happening on the gameobject, purely for debugging
CConstantStat	Stat that just returns its base value
CControllerActionBase	Base class for actions that can use their own animator controllers which overrides the characters by default the controller is started with the action and when it finishes it also ends the action
CCopyTransform	Copies position and rotation from a target transform to this one
CDamageEffect	Effect that repeatedly damages the character while active
CDamageEvent	Event args like class that gets passed through all the participants when damage occurs -PreDamage ist sent to sender and receiver, they can cancel damage at this stage by returning false -OnDamage is sent to sender, receiver and the DamageKind for every damage parameter on the sender -PostDamage is send to sender and receiver
CDamageInstance	Utility class used in damage senders to keep track of the active damages also manages the timing for ticking damage
CDamageKind	Base class for damage kinds, typically damages will reduce some resource value which is implemented in ResourceDamage technically though damages can do pretty much anything to the sender and receiver by creating a new implementation of DamageKind and overriding OnDamage
CDamageMessage	Can be used to send messages and trigger events filtered by damage kind and value
CDamageModifier	Offers a generic way to change damage values by a flat value or stats from a character
CDamageParameter	Serializable utility class that combines a damage kind with a value and a tag useful for configuring damage values in the inspector for example the damage of a weapon or trap
CDebugInstruction	Logs its Apply(CharacterBase) and Reset(CharacterBase) calls to the debugger
CDescriptionItem	String that will be displayed by the DescriptionText behaviour when this object is selected by the event system for example put this on a button to provide some additional info about what will happen when it is clicked
CDescriptionText	Displays description texts from an IDescriptionItem that are selected by the event system
CDestructibleDamageReceiver	Damage receiver that gets destroyed when damaged will be destroyed by any amount of damage unless attached to a character with a ResourcePool(eg. dummies in AdventureSouls) can spawn a destroyed object when it is destroyed and push on its rigidbodies(crates)
CDestructionPersister	Persister that automatically saves the destruction of its gameobject if it gets awoken again(for example by a scene reload) it reconstructs that state by destroying its gameobject useful for destructible decorators like crates
CDialogBase	Base class for simple win forms style dialogs(for example 'are you sure?' Yes/No) used from the show method from code or by using the included visual scripting nodes
CDialogElement	Dialog implementation to be used with the new UI Toolkit
CDialogTMP	Dialog implementation to be used with TextMeshPro and Unity UI
CDialogUI	Dialog implementation to be used with Unity UI and legacy Text components
CEffectBarBase	Base class for ui behaviours that visualize the active effects of a pool takes care of subscribing to the pools events
CEffectBarElement	Base class for ui toolkit elements that display which effects are active on a character it does so by adding a VisualElement for each effect under the root element check out the ManualResource scene in the AdventureManual project for examples
CEffectBarPanel	Base class for a canvas panel that displays which effects are active on a character it does so by adding a VisualElement for each effect under the root element check out the ManualResource scene in the AdventureManual project for examples
CEffectBase	This is the base class for the behaviours that will be instantiated when they are added to an EffectPool derive from this to create a new effect with some unique logic through the Pool property this scripts has access to the character it is instantiated on(EffectPool.Character) typcial examples for effects are things like poison that damage the character or buffs that alter their attributes or stats
►CEffectPool	Manages the effects that are active on a character when an effect is added it is instantiated as a child of this behaviour effects are persisted and restored when the game is loaded unless they have been added as external external effects are useful for effects that are added by items or triggers which readd the effect when the game is loaded anyway
CEffectData
CEffectValue
CEffectPoolText	Shows all active effects of a pool in a text component, useful for debugging
CEffectResourceValue	Special ChangingResourceValue that adds an effect when it is full and removes it when empty typically ChangingResourceValue.Rate should be negative so the value empties on its own after being raised by some outside source
CEffectSet	Some set of effects, most commonly used as a set of all effects that the persistence uses to load effects
CEffectType	Effects are temporary behaviours that are instantiated on the character the EffectType describes the common properties of an effect and contains a reference to the EffectBase that will be instantiated when it is active typical effects are things like buffs and debuffs
CEquipmentItem	Prefab item that can modify attributes and stats while it is equipped whether it is equippable can be restricted with attribute and stat requirements
CEventSystemCursor	Behaviour that places a transform over the EventSystem.currentSelectedGameObject which can be used to show a cursor in the UI
CFadeAndDestroy	Behaviour that wait for some duration, than fades any renderer it finds out and finally destroys its gameobject can be used to just wait and destroy be leaving fade fields empty
CFader	Simple helper that fades a canvas group and sound in or out over a short period
CFloatPersistenceTrigger	Unity events that are fired in relation to a persisted float
CFocusHelper	Focus and cursor lock handling, disables mouse when the game view is not active in the editor
CFollower	Makes this gameobject follow a target and copy its active state
CGenericAction	Action that does nothing on its own and is ended by any kind of bool input
CGenericCharacter	Concrete implementation for a character that references the other systems by their base classes any implementation can still be assigned in the inspector, the character just wont have access to any special parts in it without casting
CGenericDamage	Damage that does not do anything on its own, therefore the reaction has to be done by the receiver or sender for example bomb damage in the hero demo is only used as a filter
CGenericEffect	Basic effect without any special behaviour except adding instructions to the character useful for effects that can be expressed in instruction or are purely cosmetic
CGenericItem	Item that has no logic itself, can be used for items that are only checked for existence like keys
CGenericItemSlot	Item slot that has no logic and can be used with any item
CGenericTriggerArea	Simple generic version of trigger area, useful for hooking stuff up to its events for example gameobjects that should only be active when the player is close or traps
CGenericTriggerItem	Simple generic version of trigger item, counterpart to GenericTriggerArea this one is most likely situated on the character while the area is some part of the level
►CGroundChecker	When its Check method is called it raycasts from its own position downwards and fires different events depending on the material and texture color it finds the textures of materials checked need to have Read/Write in their import settings checked, otherwise the checker can not read the color
CGroundOption
CHideCharacterInstruction	Hides the complete character, by default this deactivates the animators gameobject
CHideSlotInstruction	Hides an item slot while it is active it may not be possible to directly access the slot(for exemple when the action is located on an item) for that reason this instruction uses the item category and an index in case there is more than one
CIAnimationPreview
CIAttributeModifier	Interface for any class the modifies attributes this modification does not change the actual attribute value it is applied when an attribute value is retrieved from the AttributePool for example equipment that provides an attribute bonus(strength ring, vitality pants)
CICharacterAssociator	Implemented by any behaviour that is owned or otherwise directly associated with a character allows other behaviours and visual scripting nodes to figure out in which characters context they are currently operating
CIDamageReceiver	Interface for any behaviour that receives damage from a IDamageSender check TriggerDamageReceiver and TriggerDamageSender for a common implementation that can in turn be built upon
CIDamageSender	Interface for any behaviour that sends damage to a IDamageReceiver check TriggerDamageReceiver and TriggerDamageSender for a common implementation that can in turn be built upon
CIDescriptionItem	Interface that provides description text for hints or tooltips
CImpactArea	Behaviour that provides keys for triggers so ImpactItem can trigger different events based on the hit object
►CImpactItem	Behaviour that triggers an event when it receives trigger enter messages which event is triggered can be keyed to an ImpactArea used in the demos to display different sparks and sounds when weapons hit the environment
CImpactOption
►CInputBindingLabel
CUxmlFactory
CUxmlTraits
►CInputBindingText	Visualizes the current binding of an input action(new input system) in a text component refreshs itself when the control method is changed so control hints are seamlessly adjusted
CBindingText
CInstantiatingItemSlot	Item slot for PrefabItem which instantiates the items prefab while it is equipped
CInstantiatingItemSlotClone	Duplicates an InstantiatingItemSlot on a different parent and possibly with a different layer used in the hero demo to instantiate gear on the model that is shown in the gear menu
CIntervalSpawner	Simply spawns some prefab periodically
CIntPersistenceTrigger	Unity events that are fired in relation to a persisted int
CInventoryBase	Base class for inventories, inventories manages items and the slots they are equipped to in addition to the simple unlimited ListedInventory a possible use cases could be a re4 style case where item stacks have a position and are limited
►CInventoryItem	Serializable utility class used in inventories to keep track of item quantity and the slot it is equipped to manages some of the plumbing between item and slot should only be created by an inventory, if you need to show items quantities in the inspector use ItemQuantity
CInventoryItemData
CInventoryItemElement	Visualizes an inventory item in the UI
CInventoryItemPanel	Visualizes an InventoryItem in the ui, the item can be forwarded to an ItemPanel to be visualized there
CInventoryText	Shows all items in the inventory in a text component, useful for debugging
CIPersister	Interface used to find any persisting behaviour in a scene currently used only by the "Check Keys" and "Generate missing Keys" buttons on the PersistenceContainer
CIPlayAnimation	Used to identify objects that play PlayableAnimation used for preview and in visual scripting
CIStatModifier	Interface for any class the modifies stats it is applied when a stat value is retrieved from the AttributePool for example equipment that provides a stat bonus(defense from armor)
CItemBase	Base class for items, items are anything character can own some amount of implementations can define whether they can be used, equipped or both and then implement some logic that happens in those cases for example a health potion could be used and equipped, when it is equipped it shows up on the characters belt and when it is used it starts a healing action or just directly adds health
CItemCategory	Category that may be used to group items in the ui
CItemChance
CItemNotification	Visualizes an item quantity that has been added or removed
CItemNotifications	Spawns an ItemNotification when something is added or removed from an inventory
CItemPanel	Visualizes an ItemBase in the ui
CItemPickupArea	Trigger area that adds items to the first character that enters and then destroys itself useful for simple pickups like coins, health or mana pots
CItemQuantity	Serializable utility class that combines an item with a quantity, useful for configuring items in the inspector for example items that are needed to do something(1xkey to open door) or items contained in a pickup
CItemQuantityText	Shows the quantity of a particular item in a UI text
CItemQuantityTextCapped	Shows the quantity of a particular item in a UI text and colors it when its capacity is reached
CItemsControlBase	Base class for selectable lists of items in ugui creates and manages ui elements based on the contents of a list similar in concept to uitoolkit listview or wpf itemscontrol
CItemsControlEntryBase	Base class for the entries of a ItemsControlBase<T> that are instantiated for every item used to expose the data of the item to the ui(for example to visualize a single InventoryItem)
CItemSet	Some set of items, most commonly used as a set of all items that the persistence uses to load items
CItemSlot	Generic base class for item slots, slots are used to equip items the protected equip(T) and unequip(T) are most important for equipment behaviour for example a helmet item on an amor slot may instantiate some visual and add a modifier to the characters defense in equip, in unequip it would destroy the visual and remove the modifier canEquip can be overridden to define whether a specific item can be equipped at the moment, applyVisibility is used when a slot is hidden(like weapons being hidden while pulling a lever)
CItemSlotBase	Non-generic base class for item slots, usually the generic ItemSlot<T> should be derived from this
CItemSlotCategory	Slot category that determines which slots an item can be equipped to
CItemSlotElement	Visualizes an item slot in the UI
CItemSlotPanel	Visualizes an ItemSlotBase in the ui, the equipped item can be forwarded to an AdventureCore.InventoryItemPanel to be visualized there
CItemSlotProxy	Special slot that redirects to one of a number of other slots the actual slot currently being used can be rotated through using NextSlot and PreviousSlot
►CListedInventory	Simple implementation of an unlimited inventory that simply stores everything in a list
CListedInventoryData
CListedInventoryElement	Visualizes a listed inventory in a ui document
CListedInventoryEntryPanel	Implementation of ItemsControlEntryBase<T> for ListedInventoryPanel instantiated for every inventory item that is shown in the inventor panel
CListedInventoryPanel	Visualizes the contents of a ListedInventory and can enable using or equipping the items
CLockableCameraBase	Base class for camera controllers that can be locked to lock on points
CLockableCameraController	Camera controller for players, provide input in OnInput(InputValue) or SetInput(Vector2) rotates its own transform so it should be put on the pivot for a 3rd person style free look camera can be locked to targets and smoothly transitionto another one with cinemachine virtual cameras, check the exact setup in the AdventureSouls demo
CLockableCameraFreeLook	Camera controller for players, provide input in OnInput(InputValue) or SetInput(Vector2) rotates its own transform so it should be put on the pivot for a 3rd person style free look camera can be locked to targets and smoothly transitionto another one with cinemachine virtual cameras, check the exact setup in the AdventureSouls demo
CLockOnCandidateChangedUnit
CLockOnManager	Manages the lock on points within its area and decides which one is chosen or switched to it choses the lock on point that is visible(raycast) and closest to the center of the screen horizontally it can also unlock a locked in point after some delay when it becomes invisible
CLockOnPoint	Point to be locked on by LockOnManager inherit from this and override Show and Hide to react in some way(showing a some lock on visual in 3d space instead of some 2d overlay for example)
CLockOnTargetChangedUnit
CLockOnTargetChangedWithoutHoldingUnit
CManualMovement	Movement implementation for characters that handle movement themselfes or dont really need movement
CManualPersister	Persister that does nothing on its own, it is always used by some other behaviour this helps to encapsulate persistence logic and mostly reduces the actual persistence in game logic multiple behaviours can use the same persister by passing a subKey that will be added to the key of the persister needed by all the core systems to save their data(attributes, inventory, ...)
CMessageEvent	Serializable utility class that combines a message with an event useful for defining actions for particular messages directly in the inspector for example playing a sound or showing some particles when a weapon is swung
CMinimalCharacterActor	Actor that only starts an action if there is no other or if the current one can end at the moment if the action can not be started at the moment it is requested it will just tbe discarded
CMotionAction	Character action that represents a simple animation like jumping or rolling when using TriggerName the animation has to send the START and END messages, RELEASE when Release is checked CharacterAnimation can be used instead of triggering an animation on the characters animator, in this case START is not necessary and END is optional
CMovableDamageReceiver	Damage receiver that applies an impulse force to a rigidbody when damaged
CMovementBase	Base class for movements, movements determine how and where a character moves these will be where player or enemy ai input is sent to move the character this base mainly defines standardized ways for other systems like actions to interfere with movement for example a common use is for actions to suspend the actual movement logic and the animator to send root motion movement
►CMovementBasePersisted	Extended version of MovementBase that adds persistence logic allows persisting position, rotation(and optionally camera position) persistence can be triggered automatically in an interval, otherwise Set() can also be called manually
CMovementData
CMovementMotionMultiplierInstruction	Mutliplies the movement root motion while it is active
CMovementSpeedMaximumInstruction	Sets the maximum speed factor to limit how fast the character can move
CMovementSpeedMinimumInstruction	Sets the minimum speed factor which can be used to force some minimum movement for example to make the character move forward a little when rolling while standing still
CMovementSpeedMultiplierInstruction	Mutliplies the movement speed while it is active
CMover	Moves the transforms position and/or rotation every frame can be used to move projectiles forward or to rotate pickups without needing animations
CMovingDamageSender	Special triggered damage sender that returns its current movement direction as its damage direction useful for moving weapons that change direction and should apply damage in their current movement direction
CMultipliedStat	Stat that increases the base value by a multiplied attribute value
CNavApproachAction	Starts an approach on a NavMeshAgentMovement and waits for its completion the target is the MovementBase.Target on the Movement
CNavAwayAction	Starts an avoid on a NavMeshAgentMovement and waits for its completion the target is the MovementBase.Target on the Movement
CNavMeshAgentMovement	Movement implementation that is built on top of the unity NavMeshAgent meant for enemy movement, use StartApproach(Action, float) to walk to the MovementBase.Target
CNavMeshTankMovement	Variation on nav mesh movement that uses root motion and manual rotation instead of letting the agent steer the movement rotates itself until it points towards the target to move forward the SpeedFactor value is set and root motion from the animator is applied
CNavPatrolAction	Moves a NavMeshAgentMovement cyclically between the specified points automatically saves its current index into the movements persister with subkey 'PAT'
CObjectAction	One time action that lets a character interact with some object that is also animated plays an animation on the character and another one on an object when the character reaches a certain point the animation needs to send a START and END message and an ACT message to start the object animation an animation on a second object can also configured so it is is started when the character animation is ending useful for doors or levers(the second end-object could be a gate that opens after the lever has been pulled)
COverlayElement	Makes a ui element automatically follow a transform
CPauseGameInstruction	Sets timeScale to 0 while it is active
CPersistedNumberText	Retrieves a number from persistence and visualizes it in a text component
►CPersistedStringText	Shows all items in the inventory in a text component, useful for debugging
CTextReplacement
CPersistenceArea	Areas are used to group persistence keys that should be saved together they are useful for splitting up smaller data that is saved more often(player position) from larger data that is saved less frequently(world state) another use would be grouping together data so it can be deleted in one go like temporary scene data that gets removed when the player switches scenes
CPersistenceContainer	Central singleton manager behaviour for anything related to persistence needs to be added to a scene for any persistence to take place any persister in a scene has to go through this container to retrieve or modify persistence data the container is responsible for managing the current data and passing it on to the PersistenceSaver to actually be saved to disk
CPersistenceData	Utility class used in persistence to hold the current data for one persistence area performs de/serialization when data is retrieved or stored and keeps track of whether it has been changed
CPersistenceSaverBase	Base class for behaviours that actually commit the persistence data to disk(or whatever else is used to save data these days) this logic is seperated from the persistence container so it can easily be replaced by some custom save logic for cloud or some platform specific use case
CPersistenceTrigger	Unity events that are fired in relation to a persisted value for example to disable or enable a barrier when some persisted bool is set
CPersisterBase	Base class for behaviours that are mainly used to persist some kind of state any other class can easily just use the persistence container without using a persister a persister is just a way of seperating persistence logic from other behaviour
CPickupAction	Action that plays an animation and adds items to the characters inventory, destroys itself afterwards the animation needs to send a START and END message!(Function:OnAnimation Parameter:START/END) has built in persistence so it does not need an extra persister if persistence states it has been used previously it fires its events and destroys itself on start
CPlaceholderItem	Item that is replaced by another item when added to the inventory(bundles of arrows, higher currency denominations) the actual replacement is handled by the inventory implementation
CPlayableAnimation	Plays an animation clip or controller on an animator using a playable graph(like a timeline) the original animation continues in the background and gets faded out and back in at the end playing animations that are not part of a characters animator this way allows decoupling actions for example when the animation for pulling a lever is configured in ObjectAction.CharacterAnimation any arbitrary (humanoid)character can use that lever without having the animation in its controller
CPlayableAnimationMessage
CPlayableAnimationParameters	Parameters for PlayableAnimation that are used in behaviours and shown in the inspector
CPlayableAnimationPlayer	Simple behaviour for playing a PlayableAnimation on a configurable animator when no animator is set the player looks for an ICharacterAssociator in its parents
CPlayableAnimationTypeAttribute	Can be used to limit the playable parameters to either clip OR controller
►CPlayerPrefSaver	Simple saver implementation that uses unitys player prefs registry on windows, indexedDb in Web, ... this should be enough for debugging, prototyping and very simple games for larger games implementing a more permanent custom solution is advisable
CDebugSaveData
CEntryData
CSaveData
CPlaytimePersister	Persists and raises the playtime loads previous playtime on awake and persists it whenever the container is saved uses the scaled time so when Time.timeScale is set to 0 in menus the playtime does not increase
CPoseAction	Character action that represents a pose the character can go into and will only end once some input occurs can be jumpstarted to go directly to the state of the pose without the animation into it
CPrefabItem	Item that defines a prefab which is instantiated when equipped in a InstantiatingItemSlot
CProjectileDamageSender	Special triggered damage sender that moves itself gets destroyed once it has done damage or hits the environment
CPurchaseAction	Character action that exchanges items, attributes or resources for different items, can also play an animation using playable or trigger
CQualityDropdown	Attaches to a dropdown, when the dropdown is changed it sets the QualityLevel accordingly and persists it the contents of the dropdown have to be defined in the ui to fit the quality levels in the settings
CRandomStatePersister	Persists the state of randomness therefore the results are consistent between play sessions for example loot will be the same if the game is saved and loaded
CResourceBarBase	Base class for a bar that visualizes a character resource when the resource gets damaged it can show the damage value for a configurable duration check out the ManualResource scene in the AdventureManual project for examples
CResourceBarElement	Overlay element that display a bar for some character resource when the resource gets damaged it shows the damage value for a configurable duration like all OverlayElements it needs a UIDocument that actually gets displayed check out the ManualResource scene in the AdventureManual project for an example
►CResourceBarManager	Singleton manager behaviour for resource bars(health bars for example) bars can be manually shown until revoked(lock on) or just temporarily when damage is done
CResourceBarPrefab
CResourceBarPanel	Visualizes a resource using canvas objects and legacy text elements check out the ManualResource scene in the AdventureManual project for an example
CResourceBarTMP	Visualizes a resource using canvas objects and TextMeshPro text elements check out the ManualResource scene in the AdventureManual project for an example
CResourceDamage	Damage that reduces some resource value(health), probably the most common kind of damage
►CResourcePool	Manages the modification and observation of a characters resources resources are behaviours of their own so they can update themselfes on a frame by frame basis any resource of a character has be linked here so it can be easily accessed
CResourceData
CValueData
CResourcePoolText	Shows all the resource values of a pool in a text component, useful for debugging
CResourceQuantity	Serializable utility class that combines a resource with a value useful for configuring resource values in the inspector for example health damage, stamina cost for moves, ..
CResourceType	Resources are floating point metrics that may change freqently or even frame by frame the actual value of the resource and its logic is defined in the ResourceValue behaviour this scriptable object is only used to identify a kind of resource(health, stamina, ...)
CResourceValue	Basic resource value that does not change on its own inherit from this class to implement resources with custom logic
CSceneExplainer	Displays an "About" button in the scene view that can be used to get documentation and comments specific to the current scene
CScriptableHelper	Helper class used in unity events in the inspector to call general functions by drawing the ScriptableHelper in AdventureCore/Utilities into the target of an event the methods become available there
CSerialCharacterActor	Base class for any actor that has one active action at a time
CSlotText	Shows the currently equipped item of a slot
CSphereDamageSender	Performs a sphere overlap and damages any IDamageReceiver on the colliders/rigidbodies it finds
CStatEffect	Effect that modifies a stat while it is active by adding to it
►CStateManager	Simple state manager that acts through unity events
CStateEntry
CStateOverride
CTransitionEntry
CStatMultiplierInstruction	Multiplies the stat of its character while it is active for example a buff that increases attack by 50%
CSuspendControlInstruction	Completely stops input from being processed
CSuspendMovementCollisionInstruction	Suspends collision of the movement, usefull when an action moves a character somwhere that its usual collision would not allow for example a gap in a wall or even a ladder that would collide with the movement collision
CSuspendMovementControlInstruction	Suspends movement from processing controls but leaves movement otherwise running for example when jumping the player may not be allowed to change direction
CSuspendMovementInstruction	Suspends movement entirely, useful when an action takes over movement while it is active for example attacks that have root motion
CSuspendMovementPartsInstruction	Suspends movement translation and/or rotation more fine grained version of SuspendMovementInstruction
CSuspendMovementPersistenceInstruction	Pauses persistence of the movement, for example when standing on a moving platform or in a hazardous area
CSuspendReceiveDamageInstruction	Incoming damage is discarded while this instruction is active for example i-frames in a rolling or dodge animation
CSuspendSendDamageInstruction	No damage is sent while this instruction is active
CTargetCharacterActor	Minimal actor that tries to perform whatever action is set as Target without forcing it this is useful for debugging and visual scripting, you simply set the field without worrying about state
►CTieredStat	Stat that increases by some value for every point in an attribute how much it increases at a particular value is defined in tiers this can be used to implement diminishing or increasing returns for example vitality could increase health by 10 for the first 5 points and then by some other value
CTier
CTimedAction	Action that does nothing on its own and ends after a defined duration
CTimelineAction	Action that plays a timeline and ends when it is finished
CTimeoutEffect	Effect that terminates itself after a defined duration has run out
CTriggerArea	Generic base class for trigger areas that are entered by trigger items in unity gameobjects that are destroyed do not exit collision which can be annoying by having scripts on both sides of the collision and registering with each other we can make sure to always get enter and exit either implement a custom script that performs some logic with the participants(like lock on, damage) or use the GenericTriggerArea to add logic to the events in the inspector(traps in AdventureSouls) keep in mind this is meant for triggers not collisions, if you have problems getting the events check https://docs.unity3d.com/Manual/CollidersOverview.html
CTriggerDamageReceiver	Damage receiver that gets damaged by TriggerDamageSender when unity trigger events occur (OnTriggerEnter/OnTriggerExit(2D))
CTriggerDamageSender	Damage sender that damages TriggerDamageReceiver when unity trigger events occur (OnTriggerEnter/OnTriggerExit(2D))
CTriggerItem	Counterpart to TriggerArea<TArea, TItem>
CUIDebugger	Logs the currently focused ui toolkit element every frame
CUsableItem	Item that can add attributes, stats and effects when used
CVisualScriptingAction	Character action meant for actions mainly driven by a script machine exposes some additional events and properties to support that
CVisualScriptingHelper	Helper behaviour that carries utility methods relevant to visual scripting
►NAdventureExtras
CAdventureExtras	This script only exists to circumvent the 'empty asmdef' warning ;)
CArenaCommon	Common logic used across all scenes in the adventure arena demo
CArenaEnemy	Basic common functionality for enemies in the arena demo(stagger, death, essence drops) actual behaviour(actions) are decided in a visual scripting machine
CArenaPlayer	Basic functionality for player character in the arena demo(death)
CArenaShop	Logic for the ArenaShop scene, spawn random shops where players can exchange essence for useful items
►CArenaStage	Logic for the ArenaStage(1-4) scenes in the arena demo announces stage, spawns enemies and continues on death or win
CStageSpawn
CArenaTitle	Logic for the title scene of the arena demo checks if game can be continues and loads new or continued games
CSoulsHeroApe	Character script for the souls variant of the ape boss fight performs a random sequence of actions(punch, slam, rage) which costs it energy when the energy runs out it performs a recovery action that refills it
►NAdventureHero
►NAssets
►NSoftLeitner
►NAdventureHero
►NScripts
►NActions
CHeroHoldableAction	Can be used to nest actions that are not holdable by themselves
►NVisualScripting
CHeroInfoUnit
CHeroSheathingUnit
CHeroActionOverrideInstruction	Instruction that sets the "ActionOverride" visual scripting scene variable
CHeroActionPanel	Visualizes the current context action(opening chests, carrying stuff, ...)
CHeroBlockAction	Action that allows characters to push and pull on a block ends when the button is released(CONTEXT_ACTION_RELEASE message sent from visual scripting)
CHeroBoulder	Logic for the moving boulder tryp in the Canyon scene of the hero demo moves between multiple points that can be configured in the inspector
CHeroCarryAction	Action for carrying and subsequently throwing objects the configured rigidbody is changed to isKinematic and parented to the ItemParentOverhead set on the player character when it is thrown the rigidbody is unparented and pushed
CHeroChestAction	Action for chests that can be opened and add items to the players inventory
CHeroClimbAction	Action that starts itself when close to fitting colliders if the input is pushed towards the collider while climbing the character moves along the selected collider, movement is limited by checking directional points automatically ends when moving down if the character is grounded and the collider ends can also finish in a pull up if the collider ends at the top and fitting ground is detected only works with convex colliders because Physics.ClosestPoint(Vector3, Collider, Vector3, Quaternion) is used climbing only works on one item at a time, multiple colliders can be used by combining them in a rigidbody
CHeroEquipmentItem	Equipment items can be assigned to equipment buttons, when the assigned button is pressed the action on the instantiated item is started
CHeroEquipmentSlot	Item slot for equipment in the hero demo(bombs, grapple hook, ...) instantiates the action prefab that hero equipment items define when equipped overrides the regular usage mechanism to start that action instead
CHeroGearToggle	Logic for an entry in the gear pause menu visualizes the item and equips/unequips it when the toggle is changed
CHeroGuardAction	Action that holds up a shield in the players direction this is done by activating an animation and rotating IK bones
CHeroHealthBar	Visualizes a resource(health) using quartered sprites(hearts)
CHeroHealthUnit	Combines the images for regular and health sprites for use in HeroHealthBar
CHeroItemButton	Logic for an entry in the equipment pause menu visualizes the item and starts its action when the buttons is pressed
CHeroMenu	Manages menu animation, tab changing and quitting the game
CHeroMenuTab	One tab in the pause menu(gear, equipment, ...) provides events on activation, selects its first selectable when activated(needed for gamepad navigation)
CHeroPickupArea	Slighty modified ItemPickupArea that lets the player character know about picked up items so it can play a special pickup animation for new or special ones
►CHeroPlayerCharacter	Central character component for the player character used to configure various transforms, manages item pickup animation for newly and special items and sheathing of sword and shield
CIHoldable
CHeroShieldItem	Extended version of PrefabItem for shields that adds fields that can be used to give shields individual properties
CHeroSlingAction	Action that fires a projectile from a slingshot controls the slingshot model visibility and animation adjusts character IK to align with target or camera direction instantiates projectile and removes ammo when button is released
CHeroSlotPanel	Visualizes the item currently equipped to a slot and manages the assignment animation moving the item from the equipment menu to the slot in the HUD
►NAdventureManual
CAdventureManual	This script only exists to circumvent the 'empty asmdef' warning ;)
►NAdventureSouls
►NVisualScripting
CSoulsNPCActionsUnit
CSoulsNPCStateUnit
CSoulsPerformNPCActionUnit
CSoulsWeaponActionsUnit
CICritical	Interface for any character that can crit checked when SoulsAttackAction.CanCritical is set and the attack receives input
CIGetCritted	Interface for any character that can get critted carries some info about its state and position so the crit can check if it lines up to any of the critteds openings
CIGetGuardBroken	Interface for any character that can be guard broken by a parry when a character with this interface damages another that is currently parrying it gets guard broken this usually opens it up for a crit or at least puts it out of comission for a time
CIGetStaggered	Interface for characters that can get staggered, happens when the character hits into a guard action without breaking it
CSoulsAppearanceInfo
CSoulsArmorItem	Item that is visualized with a mesh renderer and carries some stat bonuses the logic that actually applies the bonuses and shows the mesh sits in SoulsArmorSlot this is done because the slot has access to the character while the item carries no runtime data
CSoulsArmorSlot	Slot for SoulsArmorItem, instantiates the armor mesh on the character and applies its bonuses
CSoulsArrowItem	Item that holds the visual and projectile for arrows that are used in SoulsShootAction
CSoulsArrowSlot	Slot for SoulsArrowItem
CSoulsAttackAction	Action for basic melee attacks that may combo into additional hits in addition to START/END there are messages to control whether the weapon damage shoud be active(DMG_ON/DMG_OFF) the COMBO message should be sent when the animation is ready to transition into another attack
►CSoulsAttributeElement
CUxmlFactory
CSoulsBonfireAction	Plays the correspondig timelines when entering, sitting or leaving a bonfire also responsible for aligning the character and camera as well as triggering the level up menu and the scene/character reset changing state entering>active and exiting>ended happens automatically when the timeline ends active>exiting is triggered when a cancel input(bool:false) is sent when the user presses B or the leave button the characters animator is autoamtically assigned to missing bindings which lets us decouple bonfires from the player character
CSoulsBossArea	Boss area that closes off the player when the fight starts, triggers its health bar and handles persistence ends when the boss is destroyed which happens either when it is defeated or when the scene is unloaded because the player died + it suspends persistence during the fight so if the player quits out he starts back before the fight started if the fight has been previously won it removes the boss on start
CSoulsCharacterBase	Defines some common logic for the different charcters in the souls demo this currently includes the guard, stagger, parry, guard break logic as well as the ragdoll
CSoulsCommons	Singleton game manager class, this is where logic sits that pertains to the Game holds the more widely used types so they dont have to be set in a bunch of places(health, defense, ...) also reponsible for scene and save management
CSoulsCriticalAction	Action that gets checked by attacks with SoulsAttackAction.CanCritical can only start when the trigger of a character with IGetCritted is in its trigger area it also checks if that angle is right for a front/back crit provided the critted character is open there when it is actually started it forces the critted character into a SoulsCrittedAction in addition ot START/END a HIT message has to be sent to indicate to moment of impact
CSoulsCrittedAction	Action started on a critted character by SoulsCriticalAction moves the character to the appropriate position to be critted
CSoulsDungeon	Scene logic for the dungeon level
CSoulsEnemyCharacter	Basic enemy character which extends the basic NPC with a trigger area that aggroes to any character that enters it
CSoulsEquipmentPanel	Souls menu panel that is displayed when the equipment button is clicked manages all the different equipment slot elements
CSoulsFriendCharacter	Basic friendly NPC that only aggroes if hit more than once and has a some action that player can interact with(talking, trading, ...) the first time it is hit it will equip any weapon in its inventory and if it goes below half health it will try to heal
CSoulsGuardAction	Action for holding up a weapon(typically a shield) that guards the character from damage
CSoulsHideHUDInstruction	Instruction that hides the HUD while it is active(for cutscenes or sitting at the bonfire)
CSoulsHideWeaponsInstruction	Instruction that hides the configured weapon slots when active(when opening doors, climbing ladders) the generic HideSlotInstruction would have also worked but having both in one is more convenient
CSoulsHUD	Manages the HUD of the souls demo(boss health, xp, context action text, ...) (resource bars for player and enemy are self contained using core components and dont require management from here)
►CSoulsInput
CActActions
CActionActions
CIActActions
CIActionActions
CILookActions
CIMoveActions
CISystemActions
CIUIActions
CLookActions
CMoveActions
CSystemActions
CUIActions
CSoulsInventoryPanel	Souls menu panel that is displayed when the "Inventory" button is clicked shows all the items in the inventory, usable items can be used directly
►CSoulsItemElement
CUxmlFactory
►CSoulsItemSelector	Manages a ui element that lets users select an item from the inventory, used to select items for equipment slots
CResult
CSoulsLadderAction	Action for climbing ladders with configurable segment count ENTER/EXIT messages are used to get on or off, the PASS message indicates that a segment has been successfully de-/ascended
CSoulsLadderEnterAction	Proxy action for SoulsLadderAction needed so the ladder action knows if the character is at the start or end
CSoulsLevelUp	Logic for the level up dialog that is displayed when resting at a bonfire lets players exchange experience for attribute increases
CSoulsLoading	Manages the loading scene used when loading souls levels can display cuscenes or simply wait for loading when configured progress is displayed in a bar and it waits for confirmation from the player
CSoulsMenu	Manages the souls menu and coordinates the different menu panels(inventory, equipment, system)
CSoulsMenuPanel	Base class for the panels that can be opened in the menu using the buttons in the top right in souls provides basic functionality like showing and hiding the panel
CSoulsMorningstar	Simple boss enemy with a stomp for longer distances, a spin for when the player is behind it and a smash
CSoulsNewGameDialog	Logic for the new game dialog which lets players customize their character before starting the game
►CSoulsNonPlayerCharacter	Common base for simple NPC characters that can be idle or attacking by default it starts attacking when hit and will attack until it runs out of stamina, recover and repeat
CNPCData
CSoulsParryAction	Action that can guard break another character if it deals damage to it between PARRY_ON and PARRY_OFF starting the actual guardBreak is done in CharacterBase.PreDamageReceive(IDamageSender, IDamageReceiver)
CSoulsPickupAction	Special souls version of the default PickupAction that shows the picked up items in the souls pickup dialog
CSoulsPlayerCharacter	Ties together all the logic directly associated with the player
CSoulsRecoverAction	Action for enemies that plays an animation while it refills a resource and ends when it is fully replenished
CSoulsRecoveryAction	Similar to a pickup but instead of an item it gives the player the xp that was dropped on the last death
►CSoulsSaveElement
CUxmlFactory
CSoulsSaveInfo	Info that is persisted for every save slot and displayed in the main menu
CSoulsShootAction	Action for firing projectiles from a bow weapon that is drawn uses SoulsArrowItem for the visual that is displayed during draw when it is fired the arrows projectile is created and one arrow is removed from inventory
►CSoulsSlotElement
CUxmlFactory
CSoulsStamina	Special kind of refilling resource empties when the movement is sprinting stops refilling when the character is acting
CSoulsSuspendActingInstruction	Disables all Act inputs while active
CSoulsSystemPanel	Logic for the system panel in souls, this is the panel that opens when the menu is opened and System is clicked at the top right
CSoulsTalkAction	Action that opens up a message box that displays some text
CSoulsTeleportAction	Action that teleports the character to a different position in the same or a different scene
CSoulsTitle	General logic for the title screen in souls lets players quit and initializes the save slots creating new games or loading existing ones is handled in the slots
►CSoulsTradeAction	Action that allows trading using the SoulsTrading dialog
CTradeActionData
CTradeItem
CTradeItemData
CSoulsTrading	Logic for ui element that is displayed when trading with an npc lists available items and lets player exchange experience
CSoulsTwoHandAction	Action that toggles a weapons two handedness and ends immediately for example bows can't do anything onehanded so this action is put into the attacks instead
CSoulsUsableAction	Action for usable items the POCKET message is used to indicate the character reaching into its pocket before and after using the item ACT is used to indicate the character actually using the item and for its effects to occur
CSoulsUsableItem	Item that has an action which may use the item using the item will then add some resources to the character
CSoulsUsableSlot	Instantiates the action/visual of the item equipped to it and binds input to its activation
CSoulsUsableSlots	Special item slot proxy that rebinds input to the current usable slot when the slots behind the proxy are rotated through
►CSoulsWeapon	Weapon behaviour carries attack actions for either hand as well as its base damage its prefab is configured on the SoulsWeaponItem and it gets instantiated by the SoulsWeaponSlot on equip that base damage can be modified by the attacks and by stat bonuses
CDamageBonus
CSoulsWeaponItem	Weapon item carries the SoulsWeapons prefab which actually holds all the action and damage information
CSoulsWeaponSlot	Instantiates the SoulsWeapon and binds inputs to the appropriate actions